FitServe Ltd Fitness Industry Engineers Service@FitServe.co.uk

Cybex - Johnson - Matrix - Precor - Life Fitness - Horizon - Vision - Teca - Nautilus - Bodyguard - Shokk - Schwinn - Keiser - Concept 2 - Pulse - TechnoGym - Powersport - BodySolid - Treadmill -

Cross Trainer - X Trainer - Elliptical - Multi Station - Gym Repair - Gym Service - Gym Maintenance -Service Certificate - Service Agreements- Bike - Cycle - Rower -

Treadmill Maintenance

What FitServe Do

 

· Remove dirt and debris from motors, vents and circuit
boards.

· Inspect wire harnesses and connections.

· Lube all chains, bearings, bushings, rollers, pulleys
and pivots.

· Sand build up corrosion from motor flywheels and
rollers (where applicable).

· Check condition of motor commutator and brushes
(clean motor commutator where applicable).

· Check condition of alternators (where applicable).

· Remove covers, clean and vacuum out interiors.

· Check condition and alignment of all drive belts, chains
and cables.

· Align and tighten walking belt.

· Lubricate belt and deck.

· Inspect condition of all bearings and bushings.

· Inspect all other parts for wear and function.

· Tighten loose crank arms, belts and pulleys.

· Check calibration of elevation sensors, re calibrate
if necessary.

· Grease drive assemblies and elevation drive systems.

· Check machine function and operation.

· Clean exterior with polish / sealer.

· Run amp / friction tests to test wear on belts and
decks.

· Clean and check speed sensors.

· Complete audible inspection of motor, crank and
roller bearings.

 

Maintenance Tips

• Keep all moving parts well oiled (See our U-Tube Channel for details)
• Use high quality lubricants (Available from FitServe)
• Keep all surfaces clean from sweat and residue
• Keep treadmill deck well lubricated to avoid overloading the Power Board and Motor
• Investigate any unusual noises before they become a more serious problem
• Regular service intervals are more cost effective than replacing seriously worn parts